User manual
Device Settings
myUTN User Manual 57
4.7 How to Use the Notification Service (only
myUTN-80 and later)
You can get notifications in the form of emails or SNMP traps from
the UTN server. By means of these notifications up to four email
recipients can be informed about various events irrespective of time
and location.
The following message types are possible:
• The status email periodically informs the recipient about the
status of the UTN server and the connected USB devices.
• The event notification informs you about a specific event on the
UTN server via email or SNMP trap. The event can be:
- The restart of the UTN server.
- The connection/disconnection of a USB device to/from the UTN
server.
- The activation/deactivation of a USB device.
What Do You Want
to Do?
’Configuring the sending of status emails’ Ö57
’Configuring event notifications via email’ Ö58
’Configuring event notifications via SNMP traps’ Ö58
Configuring the sending of status emails
Requirements
;
SMTP parameters have been configured on the UTN server, see:
Ö
44.
;
A DNS server has been configured on the UTN server, see:
Ö
40.
For the notification service you can specify up to two email
recipients.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE - Notification.
3. Enter the recipient into the Email address box.
4. Tick the desired recipient in the Status email area.