User manual
Device Settings
myUTN User Manual 58
5. Specify the interval.
6. Click Save & Restart to confirm.
ª The settings are saved.
Configuring event notifications via email
Requirements
; SMTP parameters have been configured on the
UTN server, see:
Ö44
.
;
A DNS server has been configured on the UTN server, see:
Ö
40.
For the notification service you can specify up to two email
recipients and the message types.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE - Notification.
3. Enter the recipient into the Email address box.
4. Tick the options with the desired message types.
5. Click Save & Restart to confirm.
ª The settings are saved.
Configuring event notifications via SNMP traps
For the notification service you can specify up to two SNMP trap
recipients and the message types.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE - Notification.
3. In the SNMP traps area, specify the recipients via the IP address
and the community.
4. Tick the options with the desired message types.
5. Click Save & Restart to confirm.
ª The settings are saved.