User manual

General Information
myUTN User Manual 6
1.1 myUTN
Purpose
myUTN (myUSB to Network) allows you to access
non-network-ready USB devices (e.g. hard disks, printers, etc.) in the
network. The USB devices will be connected to the USB port of the
UTN server.
The 'dongle server' (myUTN-80) was exclusively designed for the
deployment of USB dongles.
The 'Scannerserver' (myUTN-130) was exclusively designed for the
deployment of USB scanners.
The software tool 'SEH UTN Manager' handles the access of the USB
devices. The software is installed on all clients that are meant to
access a USB device in the network. The SEH UTN Manager shows
the availability of all USB devices in the network and establishes a
connection between the client and the USB device.
System
Requirements
myUTN has been designed for the use in TCP/IP-based networks. The
SEH UTN Manager has been designed for the use in the following
systems:
• Windows XP and later
• Mac OS X 10.6.x, Mac OS X 10.7.x (64-bit), OS X 10.8.x
Procedure and Basic
Functions
After the SEH UTN Manager is started, the network will be scanned
for connected UTN servers. The network range to be scanned is freely
definable. All UTN servers found will be shown in the network list
together with the connected devices. The preferred devices will be
selected and added to the selection list. The devices in the selection
list can be connected to the client.