Manualshelf

User manual

ManualsBrandsSEH ManualsNetworkingmyUTN-52
51525354555657585960
Device Settings
myUTN User Manual 60
What Do you Want
to Do?
’Entering VLANs’ Ö60
’Allocating VLAN to a USB port’ Ö60
Entering VLANs
Proceed as follows:
1. Start the myUTN Control Center.
2. Select NETWORK - IPv4 VLAN.
3. Configure the VLAN parameters; see: Table 10 Ö60.
4. Click Save to confirm.
ª The settings are saved.
Table 10: IPv4 VLANParameters
Allocating VLAN to a USB port
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – USB port access.
3. Allocate a VLAN to the USB port via the Allocate VLAN list.
4. Click Save to confirm.
ª The settings are saved.
Parameters Description
VLAN
Enables/disables the forwarding of VLAN data.
IP address IP address of the UTN server within the VLAN.
Subnet mask Subnet mask of the UTN server within the VLAN.
VLAN ID ID for the identification of the VLAN (0–4096).
0 = untagged multihomed IP addresses