User manual
Working with the SEH UTN Manager
myUTN User Manual 66
5.5 How to Request an Occupied Device
You can request a device that is being actively used by another user.
The other user will be informed about your request via a popup
window. The user can then terminate the connection to the USB
device. When the device is shared, the connection between the USB
device and your client will be established automatically.
Requirements
; The SEH UTN Manager (complete version) is installed on the
client; see: Ö20.
; The SEH UTN Manager is installed on the client of the user who
uses the USB device; see: Ö20.
; The SEH UTN Manager is be executed on both clients.
; The USB device is shown in the selection list; see: Ö63.
Proceed as follows:
1. Mark the relevant USB device in the selection list.
2. Select Device – Request from the menu bar.
ª The device request is sent to the user who uses the device.