User manual
Working with the SEH UTN Manager
myUTN User Manual 67
5.6 How to Automate Device Connections and
Program Starts
You can automate device connections and program starts in many
ways. This is done by various automatisms.
What Do You Want to
Do?
’Activating the Device Automatically after the SEH UTN Manager
Program Start (Auto-Connect)’ Ö67
’Automatically disconnect the connection to a device after the
time defined (Auto-Disconnect)’ Ö68
’Automatically Creating a Connection between the USB Device and the
Client when a Print Job is Received (Print-On-Demand)’
Ö
69
’Creating a UTN Action: Automated Device Connections and
Program Starts without the SEH UTN Manager Interface’ Ö70
’Using the Additional Tool 'utnm'’ Ö140
Activating the Device Automatically after the SEH UTN Manager
Program Start (Auto-Connect)
This functionality allows for the automatic activation of a device
connection after the launch of the SEH UTN Manager.
Can only be configured by an administrator.
Requirements
; The SEH UTN Manager (complete version) is installed on the
client; see: Ö20.
; The USB device is shown in the selection list; see: Ö
63
.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Mark the relevant USB device in the selection list.
3. Select Device – Settings from the menu bar.