User manual
Working with the SEH UTN Manager
myUTN User Manual 68
4. Tick Activates the device automatically after the SEH UTN
Manager program start. (Auto-Connect).
5. Click OK.
ª The setting will be saved.
Automatically disconnect the connection to a device after the
time defined (Auto-Disconnect)
This function allows you to automatically disconnect the connection
to a USB device after the time defined. A one-off prolongation of
the connection by the duration of the defined time can be
optionally activated. The settings apply to all USB devices on a UTN
server.
Two minutes before the expiration of the defined time, the user will
receive a note in order to avoid data loss and error conditions. If the
prolongation is enabled, the note with the possibility to accept or
reject the prolongation will appear.
You have the option of being informed about the availability of the
device after the automatic disconnection. For this purpose, set up a
notification if the device is available; see: Ö72.
Auto-Disconnect allows a large number of network participants to
access a small amount of devices and avoids idle times.
Can only be configured by an administrator.
Requirements
; The SEH UTN Manager (complete version) is installed on the
client; see: Ö20.
; The UTN server is displayed in the 'Automatic Device Disconnect'
area; see: Ö63.
Proceed as follows:
1. Start the SEH UTN Manager.