User manual
Working with the SEH UTN Manager
myUTN User Manual 69
2. Windows: Select Program – Options from the menu bar.
Mac: Select SEH UTN Manager – Preferences from the menu bar.
The Options dialog appears.
3. Select the Automatisms tab.
4. In the Automatic Device Disconnect area, tick Status for the
relevant UTN server.
5. Define the desired time range (10–525 minutes).
6. Optionally, tick Prolongation.
7. Click OK.
ª The setting will be saved.
Automatically Creating a Connection between the USB Device and
the Client when a Print Job is Received (Print-On-Demand)
A connection between the USB device (printer or MFP) and the
client will be automatically created as soon as a print job is received.
After completion of the print job, the connection will be
automatically disabled.
Can only be configured by an administrator.
Requirements
; The SEH UTN Manager (complete version) is installed on the
client; see: Ö20.
; The USB device is shown in the selection list; see: Ö63.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Mark the relevant USB device in the selection list.
3. Select Device – Settings from the menu bar.
4. Tick Print-On-Demand.
5. Click OK.
ª The setting will be saved.
In order to use this option, the printer must be set up on this client
(driver installation).