User manual

Security
myUTN User Manual 87
Blocking access to USB devices
If you want to control the access to a USB device you must specify a
key for the USB port via the myUTN Control Center.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – USB port access.
3. Select the entry Port key control from the Method list of the
relevant USB port.
4. Click Generate key or enter a freely definable key into the Key
box (a maximum of 64 ASCII characters).
5. Click Save to confirm.
ª The settings are saved. Access to the USB device is protected.
Unblocking access to USB devices
In order for a user to gain access to a USB device that is protected
by means of the USB port key control, an appropriate key must be
entered on the client via the SEH UTN Manager.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select the UTN server from the selection list.
3. Select the command Set USB Port Keys from the UTN server
menu bar.
The Set USB Port Keys dialog appears.
4. Enter the key for the relevant USB port.
5. Click OK.
ª The access to the USB device is shared. The USB device is shown
in the selection list and can be operated.