Manualshelf

User manual

ManualsBrandsSEH ManualsNetworkingmyUTN-52
919293949596979899100
Security
myUTN User Manual 91
’Saving the CA Certificate in the UTN Server’ Ö93
’Saving the Root Certificate in the UTN Server’ Ö94
’Saving the PKCS#12 Certificate in the UTN Server’ Ö94
’Saving S/MIME Certificates in the UTN Server (only myUTN-80
and later)’ Ö95
’Deleting Certificates’ Ö96
Displaying Certificates
Certificates installed on the UTN server and certificate requests can
be displayed and viewed.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY - Certificates.
3. Select the certificate via the icon .
ª The certificate is displayed.
Creating a Self-Signed Certificate
If a self-signed certificate has already been created on the UTN
server, you must first delete the certificate; see: Ö96.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY - Certificates.
3. Click Self-signed certificate.
4. Enter the relevant parameters, see: Table 11 Ö92.
5. Click Install.
ª The certificate will be created and installed. This may take a few
minutes.