User manual

Security
myUTN User Manual 93
certificate on the basis of the certificate request. The certificate
must be in base64 format.
If a certificate request has already been created on the UTN server,
you must first delete the certificate request; see: Ö96.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY - Certificates.
3. Click Certificate request.
4. Enter the required parameters, see: Table 11
Ö92.
5. Click Create a request .
The creation of the certificate request is in progress. This may
take a few minutes.
6. Select Upload and save the requests in a text file.
7. Click OK.
8. Send the text file as certificate request to a certification
authority.
When the CA certificate has been received, it must be saved in the
UTN server; see: Ö93.
Saving the CA Certificate in the UTN Server
If a CA certificate has already been installed on the UTN server, it
will be overwritten.
Requirements
; A certificate request has been created at an earlier date; see:
Ö92.
; The certificate must be in base64 format.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY - Certificates.