User manual

Security
myUTN User Manual 94
3. Click Requested certificate.
4. Click Browse.
5. Specify the CA certificate.
6. Click Install.
ª The CA certificate will be saved in the UTN server.
Saving the Root Certificate in the UTN Server
The UTN server offers a number of authentication methods to verify
its identity in a network. If you use the authentication method
'EAP-TLS', you must install the root certificate of the authentication
server (RADIUS) on the UTN server; see:
Ö98.
If a root certificate has already been installed on the UTN server, it
will be overwritten.
Requirements
; The certificate must be in base64 format.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY - Certificates.
3. Click Root certificate.
4. Click Browse.
5. Specify the root certificate.
6. Click Install.
ª The root certificate is saved in the UTN server.
Saving the PKCS#12 Certificate in the UTN Server
Certificates with the PKCS#12 format are used to save private keys
and their respective certificates and to protect them by means of a
password.
If a PKCS#12 certificate has already been installed on the UTN
server, it will be overwritten.