User manual
Security
myUTN User Manual 97
What Do You Want
to Do?
’Configuring EAP-MD5’ Ö97
’Configuring EAP-TLS’ Ö98
’Configuring EAP-TTLS’ Ö99
’Configuring PEAP’ Ö100
’Configuring EAP-FAST’ Ö101
Configuring EAP-MD5
Benefits and
Purpose
EAP-MD5 validates the identity of devices or users before they gain
access to network resources. You can configure the UTN server for
the EAP-MD5 network authentication. This ensures that the UTN
server gets access to protected networks.
Basic Functions
EAP-MD5 describes a user-based authentication method via a
RADIUS server. The UTN server must be defined as user (with user
name and password) on a RADIUS server. The authentication method
EAP-MD5 must then be enabled on the UTN server and the user
name and password need to be entered.
Requirements
; The UTN server is defined as user (with user name and password)
on a RADIUS server.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – Authentication.
3. Select MD5 from the Authentication method list.
4. Enter the user name and the password that are used for the
configuration of the UTN server on the RADIUS server.
5. Click Save & Restart to confirm.
ª The settings are saved.