User manual

Maintenance
myUTN User Manual Mac 107
Upon delivery, the SD card is already inserted into the SD card reader
and ready for use (installation or formatting are not required).
By means of the backup, the whole configuration can be quickly and
easily loaded to other UTN servers (e.g. when exchanging a UTN
server). Parameter values, passwords and certificates will be loaded
automatically from the SD card to a Dongleserver myUTN-800 after
a cold start of the UTN server.
What Do You Want
To Do?
 ’Displaying Parameter Values’ 107
 ’Saving the Parameter File’ 107
 ’Loading the Parameter file onto the UTN Server’ 108
 ’Automatic backup (myUTN-800 only)’ 108
Displaying Parameter Values
Proceed as follows:
1. Start the myUTN Control Center.
2. Select MAINTENANCE – Parameter backup.
3. Click the icon .
 The current parameter values are displayed.
A detailed description of the parameters can be found in the
’Parameterliste’ 121.
Saving the Parameter File
Proceed as follows:
1. Start the myUTN Control Center.
2. Select MAINTENANCE – Parameter backup.