User manual

Maintenance
myUTN User Manual Mac 109
7.2 How to Reset the UTN Parameters to their
Default Values
It is possible to reset the UTN Server’s parameters to the default val-
ues (factory settings). All previously configured parameter values
will be deleted in this process. Installed certificates will not be
deleted.
If you reset the parameters, the IP address of the UTN server may
change and the connection to the myUTN Control Center may be
terminated.
When is Resetting
Recommended?
You must reset the parameters, for example, if you have changed the
location of the UTN server and if you want to use the UTN server in
a different network. Before this change of location, you should reset
the parameters to the default settings to install the UTN server in
another network.
What Do You Want
To Do?
 ’Resetting the Parameters via the myUTN Control Center’ 109
 ’Resetting the Parameters via the InterCon-NetTool’ 110
 ’Resetting the Parameters via the Reset Button’ 110
By means of the reset button of the device you can reset the param-
eters without entering the password.
Resetting the Parameters via the myUTN Control Center
Proceed as follows:
1. Start the myUTN Control Center.
2. Select MAINTENANCE – Default settings.
3. Click Default settings.
A security query appears.
4. Confirm the security query.
 The parameters are reset.