User manual

Maintenance
myUTN User Manual Mac 111
[Phase 1] Reset [Phase 2] Restart
Switch off the UTN server
(interrupt the power supply).
Switch off the UTN server
(interrupt the power supply).
Press and hold the reset
button.
Switch on the UTN server
(establish the power supply).
Switch on the UTN server
(establish the power supply).
Wait until the activity LED and
status LED blink
synchronously.
The reset mode has been
activated.
Release the reset button for
about 2 seconds.
The LEDs blink alternatingly.
Press and hold the reset
button again.
The LEDs blink
synchronously.
After a few seconds, only the
activity LED will blink.
Release the reset button.