User manual

Maintenance
myUTN User Manual Mac 114
7.4 How to Restart the UTN Server
The UTN server will automatically restart after changes to the
parameters or after an update. If the UTN server is in an undefined
state, it can also be manually restarted.
What Do You Want
To Do?
 ’Restarting the UTN Server via the myUTN Control Center’
11 4
 ’Restarting the UTN-Server via the InterCon-NetTool’ 114
 ’Restarting the UTN server via the restart button (only
myUTN-800)’ 11 4
Restarting the UTN Server via the myUTN Control Center
Proceed as follows:
1. Start the myUTN Control Center.
2. Select MAINTENANCE – Restart.
3. Click Restart.
 The UTN server will be restarted.
Restarting the UTN-Server via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select the UTN server from the device list.
3. Select Actions – Restart from the menu bar.
4. Click Finish.
 The UTN server will be restarted.
Restarting the UTN server via the restart button (only
myUTN-800)
Proceed as follows:
1. Press the restart button of the device for a short time.
 The UTN server will be restarted.