User manual

Appendix - Parameter List
myUTN User Manual Mac 120
Tabelle 14: Parameter List - IPv4
Tabelle 15: Parameter List - IPv4-VLAN (only myUTN-80 and later)
Parameters Value Default Description
ip_addr
[IP address]
valid IP address 169.254.
0.0/16
Specifies the IP address of the
UTN server.
ip_mask
[Subnet mask]
valid IP address 255.255.
0.0
Specifies the subnet mask of
the UTN server.
ip_gate
[Gateway]
valid IP address 0.0.0.0 Specifies the gateway
address of the UTN server.
ip_dhcp
[DHCP]
on/off on Enables/disables the DHCP
protocol.
ip_bootp
[BOOTP]
on/off on Enables/disables the BOOTP
protocol.
ip_auto
[ARP/PING]
on/off on Enables/disables the IP
address assignment via
ARP/PING.
Parameters Value Default Description
ip4vlan_mgmt
[IPv4
management
VLAN]
on/off off Enables/disables the forward-
ing of IPv4 management
VLAN data.
ip4vlan_mgmt_id
[VLAN ID]
0–4096
[1–4 characters; 0–9]
0 ID for the identification of the
IPv4 management VLAN (0–
4096).
ip4vlan_mgmt_any
[Access from any
VLAN]
on/off off Enables/disables the
administrative access (web,
SNMP) to the UTN server via
IPv4 client VLANs.
If this option is enabled, the
UTN server can be
administrated via all VLANs.
The change in the SNMP access
only becomes effective after a
restart of the UTN server.