User manual

Appendix - Parameter List
myUTN User Manual Mac 127
Tabelle 27: Parameter List - SNMP
dns_domain
[Domain name]
max. 255 characters
[a–z, A–Z, 0–9]
[blank] Defines the domain name of
an existing DNS server.
dns_primary
[Primary DNS
server]
valid IP address 0.0.0.0 Defines the IP address of the
primary DNS server.
dns_secondary
[Secondary DNS
server]
valid IP address 0.0.0.0 Defines the IP address of the
secondary DNS server.
The secondary DNS server is
used if the primary DNS
server is not available.
Parameters Value Default Description
snmpv1
[SNMPv1]
on/off on Enables/disables SNMPv1.
snmpv1_ronly
[Read-only]
on/off off Enables/disables the write
protection for the community.
snmpv1_community
[Community]
max. 64 characters
[a–z, A–Z, 0–9]
public Defines the name of the
SNMP community.
The SNMP community is a
basic form of access protec-
tion in which several partici-
pants with the same access
rights are grouped together.
snmpv3
[SNMPv3]
on/off on Enables/disables SNMPv3.
any_name
[User name]
max. 64 characters
[a–z, A–Z, 0–9]
anony-
mous
Defines the name of the
SNMP user group 1.
any_pwd
[Password]
max. 64 characters
[a–z, A–Z, 0–9]
[blank] Defines the password of the
SNMP user group 1.
any_rights
[Access rights]
--- [None]
readonly
readwrite
readonly Defines the access rights of
the SNMP user group 1.
any_hash
[Hash]
md5
sha
md5 Specifies the hash algorithm
of the SNMP user group 1.
any_cipher
[Encryption]
--- [None]
aes
des
--- Defines the encryption
method of the SNMP user
group 1.
Parameters Value Default Description