User manual

General Information
myUTN User Manual Mac 13
1.5 First Steps
This section provides all the information that you need for a fast
operational readiness.
Proceed as follows:
1. Read and observe the security regulations in order to avoid
damages to people and devices; see:
12 .
2. Carry out the hardware installation. The hardware installation
comprises the connection of the UTN server to the network, the
USB device and the power supply; see: 'Quick Installation
Guide'.
3. Make sure that an IP address is stored in the UTN server; see:
14 .
4. Install and start the software tool 'SEH UTN Manager' on your
Windows client; see:
21 .
5. Add the UTN servers that you want to use to the selection list;
see: 64 .
6. Activate the connection between your client and the USB port
to which the USB device is connected; see: 65 .
 The connection will be established. The USB device can be used
by the client.