User manual

Appendix - Parameter List
myUTN User Manual Mac 136
Tabelle 35: Parameter List - Display panel (myUTN-800 only)
wifi_roaming
[Roaming]
on/off off Enables/disables the use of
roaming.
Roaming refers to the 'moving'
of one radio cell to the next.
The UTN server will use the
access point that has the stron-
gest signal. If the UTN server
moves towards the sphere of
another access point, the UTN
server switches automatically
and without loss of connection
to the next radio cell.
wifi_dbmroam
[Roaming level]
0–100
[1–3 characters; 0–9]
0 Defines the transmission
power (in -dBm) of the UTN
server.
Parameters Value Default Description
dis_def
[Identifier (display
panel)]
1–2 characters
[A–Z, 0–9]
SD Defines the identifier shown in
the display panel on the front
side of the Dongleserver.
dis_pwr
[Display error if
only one power
supply provides
power]
on/off on Enables/disables the display
of error messages in the
display panel if the UTN
server only is supplied by one
power supply.
Errors are displayed in codes;
see:
139 .
disp_sdc
[Display SD card
errors]
on/off on Enables/disables the display
of error messages in the
display panel if no SD card is
inserted into the UTN server
or if the SD card cannot be
used.
Errors are displayed in codes;
see:
139 .
Parameters Value Default Description