User manual

Appendix - Parameter List
myUTN User Manual Mac 137
Tabelle 36: Parameter List - Acoustic signal (only myUTN-800)
Tabelle 37: Parameter list - SD card (myUTN-800 only)
Parameters Value Default Description
beepPwr
[Only one power
supply provides
power]
on/off off Enables/disables the acoustic
signal that sounds if the UTN
server only is supplied by one
power supply.
beepSDc
[SD card error]
on/off off Enables/disables the acoustic
signal that sounds if no SD
card is inserted into the UTN
server or if the SD card
cannot be used.
Parameters Value Default Description
autoSync
[Parameter backup]
on/off on Enables/disables the
automatic parameter backup
to a connected SD card.