User manual

Appendix - Information shown in the display panel (myUTN-800 only)
myUTN User Manual Mac 139
8.4 Information shown in the display panel
(myUTN-800 only)
The Dongleserver myUTN-800 has a display panel at its front side. It
provides status information (error states).
Text Description Troubleshooting
DS
(identifier 51)
The Dongleserver is operational. -
E1 One of the two power supplies is
not working.
Which connection is not working
is indicated by a glowing dot (left
dot, left power supply; right dot,
right power supply).
Check the cabling connections
and voltage source.
E2 The SD card is formatted with an
unsupported file system
respectively cannot be read and
be written to.
Format the SD card in the file
format FAT32, FAT16 or FAT12.
Check if the SD card functions
properly.
E3 The SD card is read-only. Remove the write protection from
the SD card.
E4 No SD card is available in the
card reader.
Insert an SD card into the SD
card reader:
- Type: SD or SDHC
- File system: FAT32, FAT16 or
FAT12