User manual

Appendix - Additional Tool 'utnm'
myUTN User Manual Mac 149
The following commands are supported:
Command Description
-c "command string"
or
--command "command
string"
Runs a command. The command is specified in greater
detail by the command string. The following command
strings can be used:
• activate UTN server
port number
Activates the connection to a USB port and the
connected USB device.
• deactivate UTN server
port number
Deactivates the connection to a USB port and the
connected USB device. The command string 'eject'
will be used when a USB mass storage device is
connected to the USB port. The command string
'plugout' will be used for all other USB devices.
• plugin UTN server
port number
Activates the connection to a USB port and the
connected USB device.
• plugout UTN server port number
Deactivates the connection to a USB port and the
connected USB device. (Corresponds to the
'plugging out' of the device.)
Note: The command string 'deactivate' is to be
preferred.
• eject UTN server
port number
(for USB mass storage devices) Ejects the USB
device connected to the USB port. The port
connection will only be deactivated if the
communication has been terminated properly.
Note: The command string 'deactivate' is to be
preferred.
• set autoconnect = true|false UTN
server port number
Automatically activates the port connection if the
USB device is connected to the USB port but not in
use.
• getlist UTN server
Shows an overview of the USB devices (including
port number, vendor ID, product ID, manufacturer
name, product name, device class and status) that
are connected to the UTN server.
• state UTN server
port number
Displays the status of the USB device connected to
the USB port.
-h or
--help
Shows the help page.