User manual

Administration Methods
myUTN User Manual Mac 27
2.3 Administration via InterCon-NetTool
The InterCon-NetTool is a software that has been developed by SEH
Computertechnik GmbH for the administration of SEH network
devices (print server, TPG, ISD, UTN server, etc.). Depending on the
network device you can configure various features via the Inter-
Con-NetTool
After the InterCon-NetTool The network range to be scanned is
freely definable. All network devices found will be displayed in the
'device list'.
You can modify the device list and adapt it to your individual needs.
You can mark and configure the devices in the device list.
Installation
In order to use the InterCon-NetTool, the program must be installed
on a computer with Mac OS X operating system. The installation file
of the InterCon-NetTool can be found on the SEH Computertechnik
GmbH homepage:
http://www.seh-technology.com/services/downloads/myutn.html
The installation file is available as '*.dmg' for Mac systems.
Proceed as follows:
1. Open the InterCon-NetTool installation file.
The content of the file will appear on the screen.
2. Start the '*.pkg' file.
3. Follow the installation routine.
 The InterCon-NetTool will be installed on the system.
Program Start
To start the InterCon-NetTool, double click the 'Intercon-net-
tool.app' .
The program settings are saved in the 'InterCon-NetTool.ini' file. This
file can be found in the directory/Users/<user
name>/Library/Preferences/InterCon-NetTool
.