User manual

Administration Methods
myUTN User Manual Mac 29
2.4 Administration via E-Mail (only myUTN-80 and
later)
You can administer the UTN server via email and thus via any com-
puter with Internet access.
Functionalities
An email allows you to
• send UTN server status information
• define UTN server parameters or
• perform an update on the UTN server.
Requirements
 A DNS server has been configured on the UTN server, see: 38.
 In order to receive emails, the UTN server must be set up as user
with its own email address on a POP3 server.
 POP3 and SMTP parameters have been configured on the UTN
server; see: 41.
Sending Instructions
via Email
If you want to administer the UTN server, you must enter the rele-
vant instructions into the subject line of your email.
Proceed as follows:
1. Open an email program.
2. Write a new email.
3. Enter the UTN server address as recipient.
4. Enter an instruction into the subject line; see: ’Syntax and
Format of an Instruction’ 29 .
5. Send the email.
 The UTN server receives the email and carries out the instruction.
Syntax and Format
of an Instruction
Note the following syntax for instructions in the subject line:
cmd: <command> [<comment>]