User manual

Device Settings
myUTN User Manual Mac 50
4 Device Settings
What Information
Do You Need?
• ’How to Determine a Description’ 50
• ’How to Assign an Identifier Shown in the Display Panel
(myUTN-800 only)’ 51
• ’How to Configure the Device Time’ 52
• ’How to Configure the UTN (SSL) Port’ 52
• ’How to Assign a Name to a USB Port’ 53
• ’How to Deactivate a USB Port (only myUTN-80 and later)’
54
• ’How to Use the Notification Service (only myUTN-80 and later)’
54
• ’How to Get Error Messages via the Display Panel (myUTN-800
only)’ 56
• ’How to Configure Acoustic Signals (myUTN-800 only)’ 57
• ’How to Use the UTN Server in VLAN environments (only
myUTN-80 and later)’ 59
4.1 How to Determine a Description
You can assign freely definable descriptions to the UTN server. This
gives you a better overview of the devices available in the network.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE – Description.
3. Enter freely definable names for Host name, Description and
Contact person.
4. Click Save & Restart to confirm.

You can configure the device time, the UTN port, the
notification service, etc. on the UTN server. This chap-
ter describes these device settings.