User manual

Device Settings
myUTN User Manual Mac 51
 The data is saved.
To assign names to USB ports, see: 53.
4.2 How to Assign an Identifier Shown in the Display
Panel (myUTN-800 only)
The Dongleserver myUTN-800 can be mounted in a 19" server rack.
In order to identify a certain myUTN-800 if several are mounted in a
rack, an identifier is shown in the display panel on the front side of
the Dongleserver.
By default, the identifier 'DS' is displayed. You can assign a freely
definable identifier.
Do not assign an identifier to the UTN server that might be confused
with an error code (143).
Proceed as follows:
1. Start the myUTN Control Center.
2. Select DEVICE – Description.
3. Enter a freely definable description into the Identifier (display
panel) box.
(max. 2 characters; A–Z, 0–9)
4. Click Save & Restart to confirm.
 The data is saved.
Abb. 8: Display panel myUTN-800