User manual

Device Settings
myUTN User Manual Mac 55
• The event notification informs you about a specific event on the
UTN server via email or SNMP trap. The event can be:
- The restart of the UTN server.
- The connection/disconnection of a USB device to/from the
UTN server.
- The activation/deactivation of a USB port.
- The interruption or establishment of power supply.
(myUTN-800 only)
- The connection/disconnection of a SD card to/from the UTN
server. (myUTN-800 only)
- The unusability of an SD card. (myUTN-800 only)
What Do You Want
To Do?
 ’Configuring the sending of status emails’ 55
 ’Configuring event notifications via email’ 56
 ’Configuring event notifications via SNMP traps’ 56
Configuring the sending of status emails
Requirements
 SMTP parameters have been configured on the UTN server, see:
41 .
 A DNS server has been configured on the UTN server, see: 38 .
For the notification service you can specify up to two email recipi-
ents.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select Device – Notification.
3. Enter the recipient into the Email address box.
4. Tick the desired recipient in the Status email area.
5. Specify the interval.
6. Click Save & Restart to confirm.
 The settings are saved.