User manual

Device Settings
myUTN User Manual Mac 56
Configuring event notifications via email
Requirements
 SMTP parameters have been configured on the UTN server, see:
41
.
 A DNS server has been configured on the UTN server, see: 38 .
For the notification service you can specify up to two email recipi-
ents and the message types.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select Device – Notification.
3. Enter the recipient into the Email address box.
4. Tick the options with the desired message types.
5. Click Save & Restart to confirm.
 The settings are saved.
Configuring event notifications via SNMP traps
For the notification service you can specify up to two SNMP trap
recipients and the message types.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select Device – Notification.
3. In the SNMP traps area, specify the recipients via the IP address
and the community.
4. Tick the options with the desired message types.
5. Click Save & Restart to confirm.
 The settings are saved.
4.8 How to Get Error Messages via the Display Panel
(myUTN-800 only)
You can have error states be shown in the panel display on the front
side of the Dongleserver myUTN-800.
The following message types are possible: