User manual

General Information
myUTN User Manual Mac 6
1 General Information
What Information
Do You Need?
• ’myUTN’ 6
• ’Documentation’ 8
• ’Support and Service’ 11
• ’Your Safety’ 12
• ’First Steps’ 13
• ’Saving the IP Address in the UTN Server’ 14
1.1 myUTN
Purpose
myUTN (myUSB to Network) allows you to access non-net-
work-ready USB devices (e.g. hard disks, printers, etc.) in the net-
work. The USB devices will be connected to the USB port of the UTN
server.
The 'Dongleservers' (myUTN-80 and myUTN-800) are exclusively
designed for the deployment of USB dongles.
The software tool 'SEH UTN Manager' handles the access of the USB
devices. The software is installed on all clients that are meant to
access a USB device in the network. The SEH UTN Manager shows
the availability of all UTN servers in the network and establishes a
connection between the client and the USB port including the con-
nected USB device.
System
Requirements
myUTN has been designed for the use in TCP/IP-based networks. The
SEH UTN Manager has been designed for the use in the following
systems:

This chapter contains information concerning the
device and the documentation as well as notes about
your safety.
You will learn how to benefit from your UTN server and
how to operate the device properly.