User manual

Device Settings
myUTN User Manual Mac 61
3. Configure the IPv4 VLAN parameters; siehe: Tabelle 11 61 .
4. Click Save to confirm.
 The settings are saved.
Tabelle 11: IPv4 client VLAN parameters
Allocating an IPv4 client VLAN to a USB port
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – USB port access.
3. Allocate a VLAN to the USB port via the Allocate VLAN list.
4. Click Save to confirm.
 The settings are saved.
Parameters Description
VLAN Enables/disables the forwarding of IPv4 client VLAN data.
IP Address IP address of the UTN server within the IPv4 client
VLAN.
Subnet mask Subnet mask of the UTN server within the IPv4 client
VLAN.
VLAN ID ID for the identification of the IPv4 client VLAN (0–4096).
Auto-fill All 'VLAN', 'IP address' and 'Subnet mask' fields will be
filled with the values from line 1. The 'VLAN ID' will be
counted up by '1'.