User manual

Working with the SEH UTN Manager
myUTN User Manual Mac 62
5 Working with the SEH UTN Manager
What Information
Do You Need?
• ’How to Find UTN Servers/USB Devices in the Network’ 62
• ’How to Add UTN Servers/USB Devices to the Selection List’
64
• ’How to Connect a USB Port including USB Device to a Client’
65
• ’How to Cut the Connection between the USB Port including
USB Device and the Client’ 67
• ’How to Request an Occupied Device’ 68
• ’How to Automate Port Connections and Program Starts’ 69
• ’How to Get Information about the USB Port and USB Device’
74
• ’How to Manage Selection Lists for Several Participants’ 74
5.1 How to Find UTN Servers/USB Devices in the
Network
In order to display the existing UTN servers and their connected USB
devices in the network list, the network needs to be scanned. The
network can be scanned via multicast and/or freely definable ranges.
The default setting is multicast search in the local network segment.
What Do You Want
To Do?
 ’Defining Search Parameters’ 63
 ’Scanning the Network’ 63

The software tool SEH UTN Manager handles the
access of the USB devices. This chapter will show you
how to embed USB devices in the SEH UTN Manager
and how to establish connections between the client
and the USB port including the connected USB device.