User manual

Working with the SEH UTN Manager
myUTN User Manual Mac 69
5.6 How to Automate Port Connections and
Program Starts
You can automate the connections to USB ports (including con-
nected USB devices) and program starts in many ways. This is done
by various automatisms.
What Do You Want
To Do?
 ’Permanent Port Connection after Operating System Boot
(Auto-Connect)’ 69
 ’Automatically Disconnect the Port Connection after the Time
Defined (Auto-Disconnect)’ 70
 ’Automatically Creating a Connection between the USB Port and
the Client when a Print Job is Received (Print-On-Demand)’
71
 ’Creating a UTN Action: Automated Port Connections and
Program Starts without the SEH UTN Manager Interface’ 72
 Using the Additional Tool 'utnm' 150
Permanent Port Connection after Operating System Boot
(Auto-Connect)
The feature automatically establishes a permanent connection to a
USB port and the connected USB device without the need for a user
to log on to the client. The connection will be
• activated upon the operating system startup and terminated
when the system shuts down
• automatically reestablished when the system restarts.
Requirements
 The SEH UTN Manager (complete version) is installed on the
client; see: 21.
 The USB port is shown in the selection list; see: 64.
 You are logged on to the system as administrator.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select the port from the selection list.