User manual

Working with the SEH UTN Manager
myUTN User Manual Mac 70
3. Select Port – Settings from the menu bar.
The Port Settings dialog appears.
4. Tick Activates the device automatically after the SEH UTN
Manager program start. (Auto-Connect).
5. Click OK.
 The setting will be saved.
Automatically Disconnect the Port Connection after the Time
Defined (Auto-Disconnect)
This function allows you to automatically disconnect the connection
to a USB port after the time defined. A one-off prolongation of the
connection by the duration of the defined time can be optionally
activated. The settings apply to all USB ports on a UTN server.
Two minutes before the expiration of the defined time, the user will
receive a message telling them to close the connection to the USB
port and the connected USB device in order to avoid data loss and
error conditions. If the prolongation is enabled, the note with the
possibility to accept or reject the prolongation will appear.
Auto-Disconnect allows a large number of network participants to
access a small amount of USB ports including the connected USB
devices and avoids idle times.
Requirements
 The SEH UTN Manager (complete version) is installed on the
client; see: 21.
 The UTN server is displayed in the 'Automatic Device Disconnect'
area; see: 64.
 You are logged on to the system as administrator.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select SEH UTN Manager – Preferences from the menu bar.
The Options dialog appears.
3. Select the Automatisms tab.
4. In the Auto-Disconnect area, tick Status for the relevant UTN
server.
5. Define the desired time range (10-525 minutes).