User manual

Working with the SEH UTN Manager
myUTN User Manual Mac 71
6. Optionally, tick Prolongation.
7. Click OK.
 The setting will be saved.
Automatically Creating a Connection between the USB Port and
the Client when a Print Job is Received (Print-On-Demand)
A connection between the USB port or the connected USB device
(printer or multifunction printer) and the client will be automati-
cally created as soon as a print job is received. After completion of
the print job, the connection will be automatically disabled.
Requirements
 The SEH UTN Manager (complete version) is installed on the
client; see: 21.
 The USB port is shown in the selection list; see: 64.
 The printer or multifunction printer is set up on the client (driver
installation).
 You are logged on to the system as administrator.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select the port from the selection list.
3. Select Port – Settings from the menu bar.
The Port Settings dialog appears.
4. In the Automatic device connection area, tick
Print-On-Demand.
5. Click OK.
 The setting will be saved.