User manual

Working with the SEH UTN Manager
myUTN User Manual Mac 74
5.7 How to Get Information about the USB Port and
USB Device
You can view the status information of the USB port and the USB
device.
Requirements
 The SEH UTN Manager (complete version) is installed on the
client; see: 21.
 The USB port is shown in the selection list; see: 64.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select the USB port from the selection list.
 The status information is displayed in the 'Properties' area.
5.8 How to Manage Selection Lists for Several
Participants
What are Selection
Lists?
The selection list is a central element of the SEH UTN Manager. It
displays all embedded UTN servers as well as the connected USB
devices and shows their status. These USB devices can be connected
to the client via the port connection and can then be used. The
selection list can be edited and configured according to your needs
by adding and deleting the required UTN servers.
Benefits and
Purpose
By means of the type and distribution of the selection list in combi-
nation with the user management, the administrator can control the
access to the UTN servers that are available in the network.
All users will at first use the same global selection list. As an alterna-
tive, the administrator can provide users with user-specific selection
lists by means of an .ini file.
The access can be controlled by placing predefined selection lists
into user-specific directories. Revoking write rights to the .ini file
will limit and control the access to functions of the SEH UTN Man-
ager for individual users.
In the following, the selection list types will be described in greater
detail.