User manual

Working with the SEH UTN Manager
myUTN User Manual Mac 76
• The selection list can be edited by the administrator or by users
with write access.
• The users can access all devices listed in the selection list. (Pro-
vided that no security mechanisms have been specified via the
myUTN Control Center.)
• The selection lists of the users will be saved as .ini files in the
following location:
$HOME/.config/SEH Computertechnik GmbH/SEH UTN
Manager.ini
$HOME is an environment variable by Mac for the user folder. By means of the
command line the path for the current user can be determined as follows: echo
$HOME
Example:
What Do You Want
To Do?
 ’Providing the Global Selection List to All Users’ 76
 ’Providing User-Specific Selection Lists’ 77
 ’Providing Users with a Predefined Selection List’ 77
 ’Protecting the user-specific selection list’ 78
Providing the Global Selection List to All Users
Requirements
 The SEH UTN Manager (complete version) is installed on the
client; see: 21.
 You are logged on to the system as administrator.
Proceed as follows:
1. Start the SEH UTN Manager.
Mac OS X 10.9.5 (Mavericks):
echo $HOME returns /Users/User name
+
.config/SEH Computertechnik GmbH/SEH UTN Manager.ini
Complete path to the .ini file
:
/Users/User name/.config/SEH Computertechnik GmbH/SEH UTN
Manager.ini