User manual

Working with the SEH UTN Manager
myUTN User Manual Mac 78
 You are logged on to the system as administrator.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Compose the selection list for the user; see: ’How to Add UTN
Servers/USB Devices to the Selection List’
64 .
3. Select SEH UTN Manager – Preferences from the menu bar.
The Options dialog appears.
4. Select the Selection List tab.
5. Tick User selection list.
6. Click OK.
The setting will be saved.
7. Select Selection List – Export from the menu bar.
The Export to dialog appears.
8. Save the file 'SEH UTN Manager.ini' using the following path:
$HOME/.config/SEH Computertechnik GmbH/SEH UTN
Manager.ini
(See: 'User-Specific Selection List' 75 .)
 Each user has access to their own predefined selection list.
Protecting the user-specific selection list
When using predefined user-specific selection lists we recommend
protecting the selection list against modifications by the user.
The selection list of a user is stored as 'SEH UTN Manager.ini' file in
the following location:
$HOME/.config/SEH Computertechnik GmbH/SEH UTN Man-
ager.ini
(See: ’User-Specific Selection List’ 75)
Use the control panel of the operating system to turn .ini files into
read-only files. To do this, you need administrative rights on the cli-
ent.
If an 'SEH UTN Manager.ini' file becomes read-only, all functions of
the SEH UTN Manager that relate to the selection list will be dis-
abled.