User manual

Security
myUTN User Manual Mac 82
6.2 How to Control the Access to the myUTN Control
Center
You can protect the administrative access to the myUTN Control
Center by user profiles.
What Do You Want
To Do?
 ’Specifying the Permitted Web Connection Type’ 82
 ’Protecting the web access via password’ 83
The myUTN Control Center can also be protected by the SNMP secu-
rity concept. For further information; see:
• ’How to Configure SNMP’ 39.
• ’How to Use the UTN Server in VLAN environments (only
myUTN-80 and later)’ 59
Specifying the Permitted Web Connection Type
Types of Connection
(HTTP/HTTPS)
The web access to the myUTN Control Center can be secured by
selecting the permitted types of connection (HTTP/HTTPS).
If HTTPS is exclusively chosen as the connection type, the adminis-
trative web access to the myUTN Control Center is protected by
SSL/TLS. The cipher strength is defined via the encryption level
(80) and must not be 'Low'.
SSL/TLS also requires a certificate (89) to check the identity of
the UTN server. During a so-called 'handshake', the client asks for
the certificate via a browser. This certificate must be accepted by the
browser. Please refer to the documentation of your browser soft-
ware. URLs that require an SSL/TLS connection start with 'https'.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – Device access.
3. In the Web area, tick HTTP/HTTPS or HTTPS only.
4. Click Save & Restart to confirm.
 The setting will be saved.