User manual

Security
myUTN User Manual Mac 93
Creating a Certificate Request for a Requested Certificate
As preparation for using a certificate which is issued by a certifica-
tion authority for the UTN server, a certificate request can be cre-
ated in the UTN server. The request must be sent to the certification
authority which creates an certificate on the basis of this request.
The certificate must be in 'base64' format.
If a certificate request has already been created, it will be overwritten.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – Certificates.
3. Click Certificate request.
4. Enter the required parameters, siehe: Tabelle 13 92 .
5. Click Create a request .
The creation of the certificate request is in progress. This may
take a few minutes.
6. Select Upload and save the requests in a text file.
7. Click OK.
8. Send the text file as certificate request to a certification
authority.
When the requested certificate has been received, it must be
installed in the UTN server; see: 93.
Installing the Requested Certificate in the UTN Server
Requirements
 A certificate request has been created at an earlier date; see:
93.
 The certificate must be in 'base64' format.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – Certificates.
3. Click Requested certificate.
4. Click Browse.