User manual

Print Server Configuration
BaseLine Print Server User Manual 2-7
2.3.1 General Configuration
The 'General' page is used for configuring general print server
parameters.
Under 'Description', you can enter a description of the print server
or printer to gain a better overview of the print servers and printers
in the system.
Under 'Status page mode', you can determine the data format in
which the status page will be printed. The auto mode
automatically searches for a suitable data format. ASCII,
PostScript, or DATAMAX (label printer) can also be selected
manually.
'Print server language' refers to the language of the print server.
Here, you can select the language in which the print server will
print its status and configuration information. This will not affect
the printer language.
'Ethernet settings' is used for setting the speed at which other
network components, such as switches or hubs will function. If the
value is set to 'Auto', the speed will be recognized automatically.
If you set the speed manually, the speed must correspond to the
speed of the other network components. It is not possible to
operate the print server with full duplex if the hub works with half
duplex.
'HP JetAdmin compatible' enables or disables the HP JetAdmin
and HP WebJetAdmin support. The printer can then be
administered via the HP utilities.