User manual

Print Server Configuration
BaseLine Print Server User Manual 2-9
Via 'TCP/IP', you can disable TCP/IP completely.
Using 'IP address,' ' Subnet mask,' and 'Gateway,' you can
configure the relevant addresses.
In addition, you can enter a host name, the printer location, and a
contact partner for the printer.
Under 'DHCP', 'ARP/PING' and 'ZeroConf', you can enable or
disable all the different ways of saving the IP address in the print
server. We recommend that you deselect this box when the IP
address is finally assigned to the print server.
2.3.4 Configuring Microsoft Windows
The 'Microsoft Windows' page is used for configuring the
NetBIOS and WINS parameters.
Peer-to-peer printing is enabled or disabled via 'NetBIOS'.
The print server name is entered under 'NetBIOS name'.
The name of an existing domain has to be entered under 'NetBIOS
domain'. The print server will then be displayed in this domain.
'NetBIOS refresh' indicates the refresh time.
Using 'WINS registration', you can enable or disable the WINS
services.
If you have enabled 'WINS via DHCP', you can enter the IP
address of the WINS server via DHCP. If you have not enabled