User manual

Resetting the Print Server Parameters
2-16 BaseLine Print Server User Manual
2.9 Resetting the Print Server Parameters
You can use the 'Default Settings' page for resetting the print
server parameters. This action, however, will delete all parameters,
including for example, the IP address.
You must reset the parameters, for example, if you want to use the
print server in another network by changing the location of the
printer. Before this change of location, you should reset the
parameters to their default settings to install the print server in
another network.
Since the print server's IP address has been reset as well, the print
server homepage can no longer be called. If required, use the SEH
Printer Wizard to reinstall the print server.
If a password has been set in the print server, the password has to
be entered before resetting the parameters. Only by using the
status button can the parameters be reset without entering the
password. For more information, please read the section
"Resetting the Print Server Parameters" on page 3-7.
Proceed as follows:
1. Click 'Default Settings'.
The parameters are reset.