Product manual

5-2
The Keypad
650 Series AC Drive
Display Indications
Drive Status Indications
The keypad can display the following status information:
Display
DisplayDisplay
Display Status Indication and Meaning
Status Indication and MeaningStatus Indication and Meaning
Status Indication and Meaning Possible Cause
Possible CausePossible Cause
Possible Cause
READY/HEALTHY No alarms
present. Remote mode selected
PASSWORD Current password
must be entered before this
parameter may be altered.
Enter password to change the
parameter. Refer to page 5.5
LOCAL Local Control selected,
healthy, no alarms present
Added or removed from the
display letter-by-letter to indicate
entering or leaving Local Control
The DIAGNOSTICS Menu
Display
DisplayDisplay
Display Name
NameName
Name Description
DescriptionDescription
Description
FREQUENCY The current output frequency in Hertz
SPEED SETPOINT The set point as a percentage of MAX SPEED
DC LINK VOLTS
Vac (rms) x
√
2 = dc link Volts
(when motor stopped)
MOTOR CURRENT The current load value in Amps
Represents a rotating shaft:
clockwise = drive running forward
anticlockwise = drive running in reverse
Displays the units for the value:
S
for time in seconds,
A
for current in Amps
V
for voltage in Volts,
%
for percentage
Hz
for frequency in Hertz
Indicates the drive is in Local control.
Drive is in remote control when not visible.
when in the Parameter menu
when in the Setup menu
when displaying an Alarm code
a negative parameter value
p
erating mode.
d
e if not visible.
r
ive is running in
Indicates control
via fieldbus
communications
Indicates parameter numbers or values,
trip information, error codes etc.
See "Drive Status Indications" below.
Indicates the
Control Mode