Product manual

Certification for the Drive
10-4
650 Series AC Drive
Certificates
650 0.25 -1.5
K
W 200V
EC D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 26/07/2001
Issued for
EMC Directive Low Voltage Directive
The drive is CE
compliance
with the EMC
Directive when
the unit is used
as relevant
apparatus.
In accordance with the EEC Directive
89/336/EEC and amended by 92/31/EEC and
93/68/EEC, Article 10 and Annex 1, (EMC
DIRECTIVE)
We Eurotherm Drives Limited, address as
below, declare under our sole responsibility
that the above Electronic Products when
installed and operated with reference to the
instructions in the Product Manual (provided
with each piece of equipment) is in accordance
with the relevant clauses from the following
standards:-
BSEN50081-1 (1997), BSEN50082-1#
(1997), BSEN61800-3 (1996) and
EN61000-6-2 (1999)
In accordance with the EEC Directive
73/23/EEC and amended by 93/68/EEC,
Article 13 and Annex III, (LOW VOLTAGE
DIRECTIVE)
We Eurotherm Drives Limited, address as
below, declare under our sole responsibility
that the above Electronic Products when
installed and operated with reference to the
instructions in the Product Manual (provided
with each piece of equipment), is in accordance
with the following standard :-
EN50178 (1998)
marked in
accordance with
the low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
M
ANUFACTURERS
D
ECLARATIONS
This is
EMC Declaration Machinery Directive
Since the
provided to aid
your
justification for
EMC
compliance
when the unit
is used as a
component.
We Eurotherm Drives Limited, address as
below, declare under our sole responsibility
that the above Electronic Products when
installed and operated with reference to the
instructions in the Product Manual (provided
with each piece of equipment) is in accordance
with the relevant clauses from the following
standards:-
BSEN50081-1 (1997), BSEN50082-1#
(1997), BSEN61800-3 (1996) and
EN61000-6-2 (1999)
The above Electronic Products are components
to be incorporated into machinery and may not
be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
89/392/EEC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
potential hazards
are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive.
However, we do
supply a
manufacturer's
declaration for
when the drive is
used(as a
component) in
machinery.
Dr Martin Payn (
Conformance Officer)
# Compliant with these immunity standards without specified EMC filters.
EUROTHERM DRIVES LIMITED
An Invensys Company
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: [phone] FAX: [phone]
Registered Number: 1159876 England. Registered Office: Invensys House, Carlisle Place, London, SW1P 1BX
File Name: C:\Documents and Settings\jrich\My Documents\Temp docs\hp467607.919 © 1999 EUROTHERM DRIVES LIMITED
ISS: DATE DRN: J.Mc CHKD: MP DRAWING NUMBER: HK467607.919
A 20/01/01
EUROTHERM
DRIVES
TITLE:
Declarations of Conformity
SHT 4
OF
1 SHTS