User's Manual WIRELESS MICROPHONE SYSTEM MOD-16PRO MOD-16H/16P/16LV/16HS/16G SERIES SEIKAKU TECHNICAL GROUP LIMITED No. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan http://www.altoproaudio.com Tel: 886-4-22313737 email: alto@altoproaudio.com Fax: 886-4-22346757 All rights reserved to ALTO. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this c manual without written permission is forbidden.
SAFETY RELATED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions. The symbol is used in the service documentation to indicate that specific component shall be only replaced by the component specified in that documentation for safety reasons. Protective grounding terminal. Alternating current /voltage. Hazardous live terminal . ON: Denotes the apparatus turns on.
8. Warranty 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manu-facturer a better understanding of the sales status, so as to purport a more effective and efficient after-sales warranty service.
(For other market) TABLE OF CONTENTS 1. Introduction....................................................................1 2. Features.......................................................................3 3. Control Elements............................................................4 4. Operation......................................................................8 5. Modelling Technology for Wireless Microphones..........11 6. Technical Specifications..................................................
7. ANNEX 1. Introduction 7.1 Frequency Band Selection Most countries closely regulate the radio frequencies used in the transmission of wireless information. These regulations state which devices can use which frequencies, and help to limit the amount of RF(radio frequency)interference in all wireless communications. To be flexible enough to operate worldwide, MOD-16PRO Wireless receivers are available in a number of models, each with a unique frequency range.
Type: Dynamic Mic. Frequency response: 50Hz~16kHz( 3dB) Impedance: 300 20% at 1kHz Sensitivity: -71dB 3dB Direction: Omni-directional MODEL MOD-16H SPECIFICATION Oscillation mode PLL UHF SYNTHESIZED MOD-16P/16LV/16HS/16G Carrier frequency band UHF 470-900 MHz Frequency response Dependent on applicable country regulations 50 Hz-15KHz ( 3dB) Frequency stability 0.005% (-10 ~ 50 ) T.H.D. 1KHz<0.
6. Technical Specifications MODEL MOD-16PRO Channel Multi-channels, up to 100 frequency presets for each frequency bands Frequency band UHF 470-900 MHz Dependent on applicable country regulations Receiver type PLL UHF SYNTHESIZED 50 Hz-15KHz ( 3dB) Frequency response Frequency stability 0.005% (-10 -50 ) Modulation mode S/N Ratio 1KHZ 0.8% FM (F3E) 90dB Dynamic RF sensitivity 100dB -100 dBm/30dB SINAD Audio output Unbalanced 6.3mm phone jack 550mV ; Balance output Power supply 1.
3. Control Elements: Ok, enough with numbers. Let's start to familiarize with your MOD-16 System. First of all, the MOD-16PRO Receiver: 3.1 MOD-16PRO, PLL UHF Diversity Receiver FRONT PANEL 9 4 3 2 7 8 1 9 MODEL 5: DE-ESSER- The name tells everything. Use it to de-emphasize the sibilants, like the letter sound 's', for example, from your vocals. MODEL 6: VINTAGE RADIO- Old tube based Receivers made the Announcer voice sound like... yeah, we call it Vintage. Try it for a smooth satin voice.
microphone capsules for their wireless systems but this flexibility is far behind the wide choice of tones or "models", as we call them at LTO. In fact, a specific model of wireless microphone may be used by a male vocalist or female vocalist during a live performance, by a Priest in a church service, by a speaker during a seminar, by and aerobics teacher during a training lesson, by a DJ, by a choir, by an announcer, by an auction director, we could go on and on forever with endless applications.
1 Front Grill: This spring steel mesh grill will protect the microphone capsule during a live performance. Especially made for heavy metal players, alcohol, drugs, etc.. 2 LCD Display: This nice blue LCD will indicate the current operation status. 3 CH/ON Key: If you press this key for a few seconds your Transmitter will switch ON and OFF. Once you have switched the unit ON, just press this key again slightly and you can edit various parameters such as CHANNEL, GROUP, RF POWER LEVEL and LOCK/UNLOCK.
- RF Output Power Select 3.3 MOD-16P/16LV/16HS/16G, Body Pack Transmitter Your Transmitter can operate on three different levels of output power. These are different form the Handheld Model and the Bodypack model. 3 For the Handheld model the levels are - PL 0, the output power is 5dBm; - PL 1, the output power is 10dBm; - PL 2, the output power is 15dBm; 4 1 2 5 7 6 8 and for the Bodypack version the levels are 1. LCD display: This nice blue LCD will indicate the current operation status.
7 Belt Clip: It is a detachable belt clip for easy carry during the live applications. 8 Antenna: It is a flexible antenna. To get effective transmission, never cover the antenna with hand, clothes, etc during the operation, and always position the transmitter nearby the receiver. OK, if so far you remember all the functions and features of your Mod16 System you are ready to operate the Unit. Let's start from the Receiver: 4. Operation 4.