PERSONAL IN EAR MONITOR SYSTEM INSTRUCTION MANUAL PLL Synthes zed STEREO TRANSMITTER R L VOLUME CHANNEL SELECTOR HEADPHONESMONITOR POWER
CONTENTS CHARACTER SPECIFICATIONS NAMES OF PARTS INSTALLATION POWER SUPPLY CONNECTION CONTROLS AND CONNECTIONS NOTE 1 1 1m 1m TRANSMITTER THE WIRELESS TRANSMITTER LOCATED AT GOOD CONDITION PLACE. 2 3 4 5 6 BE CAREFUL, DON'T DROP OFF THE WIRELESS TRANSMITTER TO FLOOR KEEP AWAY RAINING OR SUN SHINE. Thank you for your kind using our wireless system. Before using the machine please read the instruction manuel very carefully.
SPECIFICATIONS: INSTRUCTION MANUAL Frequency range Frequency stability Antenna output R F output power AF frequency response Modulation CONTROLS AND CONNECTIONS VOLUME ADJUSTOR The purpose of this control is to give the ability to provide an audio output level from the wireless system that is similar to that of a wired micrephone. PLL Synthes zed STEREO TRANSMITTER R L VOLUME CHANNEL SELE 750~865MHz 100ppm(-10 ) BNC socket 50 Max 2.
INSTRUCTION MANUAL INSTRUCTION MANUAL POWER SUPPLY CONNECTION Use dc power supply could switch with adaptor supply or batter of 12V-15V. Connection DC supply , DC plug connection with "DC INPUT" socket. Another plug terminal connection with battery or power supply. INSTALL ANTENNA TE AN + - 12-15V 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 1 2 3 4 STEREO MONO DC INPUT IN DC 12V-15V Audio Input Connector B 1 IN PUSH 1 MIC.
INSTRUCTION MANUAL INSTRUCTION MANUAL POWER SUPPLY CONNECTION Use dc power supply could switch with adaptor supply or batter of 12V-15V. Connection DC supply , DC plug connection with "DC INPUT" socket. Another plug terminal connection with battery or power supply. INSTALL ANTENNA TE AN + - 12-15V 1-CD PLAYER 2-CASSETTE PLAYER 3-RADIO TUNER 4-AUX INPUT 1 2 3 4 STEREO MONO DC INPUT IN DC 12V-15V Audio Input Connector B 1 IN PUSH 1 MIC.
SPECIFICATIONS: INSTRUCTION MANUAL Frequency range Frequency stability Antenna output R F output power AF frequency response Modulation CONTROLS AND CONNECTIONS VOLUME ADJUSTOR The purpose of this control is to give the ability to provide an audio output level from the wireless system that is similar to that of a wired micrephone.
CONTENTS CHARACTER SPECIFICATIONS NAMES OF PARTS INSTALLATION POWER SUPPLY CONNECTION CONTROLS AND CONNECTIONS NOTE 1 1 1m 1m TRANSMITTER THE WIRELESS TRANSMITTER LOCATED AT GOOD CONDITION PLACE. 2 3 4 5 6 BE CAREFUL, DON'T DROP OFF THE WIRELESS TRANSMITTER TO FLOOR KEEP AWAY RAINING OR SUN SHINE. Thank you for your kind using our wireless system. Before using the machine please read the instruction manuel very carefully.
