Users Manual

4. RECEIVER(RX)OPTIONAL
1. SET button: press and release the button to switch interface from CH to volume. Enter CH
interface, digital light ( only figure 8 )will light up. Enter Volume interface, digital light (both
figure 8 and decimal point) will light up simultaneously.
2. UP button: under CH interface, press and release the button to increase channel code number.
you can select the channel you perfect .Press and hold the button to enter pairing mode, the
digital light begins to flash ,Once TX is paired RX successfully, the green LED will light and the
digital light stops flashing.
Under volume interface, press and release the button to increase volume, you can select the
suitable volume by this way.
3. Down button: under CH interface, press and release the button to decrease channel code
number . Press and hold the button to enter pairing mode, it will scan all channels automatically
to select the cleanest channel for pairing, the digital light begins to flash ,Once TX is paired RX
successfully, the green LED will light, the digital light stops flashing.
Under volume interface, press and release the button to reduce volume, you can select suitable
volume by this way.