Installation Instructions

Check the voltage available in your country and how the voltage of your unit is
configured, before trying to connect it to the main AC.100V/50-60Hz,
110-240V/50-60Hz.
Elevated Surface
Place the speaker on a raised surface or on a speaker stand.
This position allows greater projection of sound in full range to
the audience.
6.CABINET POSITIONS
Inclined
This position is especially used when both the artist and the
audience are standing and in a close-up shot or when the
audience is sitting in a shot in which the cabinet radiates
sound directly to them. In addition,the artist will also have
a good reference of what he is playing and singing.
Monitor
this cabinet has the option of being used as a floor monitor
or for a DJ, by tilting it sideways.
This multifunctional and portable cabinet has three modes of operation and sound projection
depending on the application and the place where you work. Thanks to internal switches and
equalizers, the system changes the response curve automatically to maintain optimum
balance in each position.
28
29
Main AC Input
30
613
Power Switch
If this switch is set to the ON position, both the AC and DC will be connected, although
the AC will take priority over the DC. When AC is not present at the power input, the DC
power source will automatically switch to keep the unit working. If this switch is in the
OFF position, the entire unit will stop working. If the switch is in the recharge position,
the internal battery will recharge, but the unit will not work.
Volume Button(VOL-)
In MP3 or Bluetooth mode, if this button is pressed quickly, it will change to the previous
song and if it is kept pressed it will decrease the volume of the player.
In Auxiliary mode it only works as a volume control, press and hold to decrease it.